|LCP-177 - Aerosol Spray Cans
Click on photo to enlarge image
CORR-EX LCP-177 is designed to protect and lubricate connectors, terminations and electrical bonds and grounds, relays, fittings, circuit boards, computers, and all forms of avionics such as: controls, radios, transponders, RDF, VOR, DME, GPS, radars, storm scope, flight control computers from moisture, general and fretting corrosion, surface static electricity, corona, and other electro migration problems.
Other areas of application include Passenger Master Control Panels, fuel shut-off valves LRUs - flap jack screws, flap tracks, actuators, hydraulic line B-nuts, fuel bladder rails, interior and exterior light sockets, antenna interfacing and any exposed metal surfaces. Use anywhere dissimilar metals may come in contact.
CORR-EX LCP-177 eliminates electrical resistance failures caused by general and fretting corrosion and to lubricate connectors, nano, micro, and conventional electrical switches, terminal blocks and Busbars, electrical bonds and grounds, relays and switching systems, multi-pin cable connectors, interior and exterior light sockets, plugs, connectors, jacks, and receptacles, as well as electronic printed circuits and microminiature circuits.
CORR-EX LCP-177 corrosion inhibitor will also protect electrical motors, electronics and switches against surface static electricity, corona, and other electro migration problems and uses a very fast evaporating nontoxic and environmentally acceptable carrier fluid that is non-reactive to most plastics.
CORR-EX LCP-177 conforms in all respects to MIL DTL-87177B.
Popular applications: Electronic circuitry, connectors and components, computers, electrical motors, relays and terminals ; Avionics - controls, radio, transponder, RDF, VOR, DME, GPS, radar, storm scope, flight control computer, light sockets and antenna interfacing; storage batteries; Passenger Master Control Panel, fuel shut-off valves - LRUs, flap jack screws, flap tracks, actuators, hydraulic line B-nuts, fuel bladder rails, and any exposed metal surfaces.
CORR-EX LCP-177 has the following combination of properties:
• Displaces both fresh and salt water moisture
• Non-toxic, Non-flammable and Non-hazardous
• Has a decomposition temperature of 550°F
• Will not freeze or harden, retains properties even in high altitude applications
• Is extremely resistant to air-drying
• Self healing
• Does not attract contaminants
• Is inert and will not increase or decrease contact resistance
• Eliminates surface static electricity, Corona and other electro migration problems in electronic
circuit boards and connectors
• Protects against wear, moisture, general and fretting corrosion.
• Non-reactive to most plastics
• Forms an airtight seal preventing damage to electronics and other surfaces caused by exposure
to acid gases such as Sulfur dioxide (SO2), Nitrogen dioxide (NO2), Hydrogen Sulfide (H2S),
Ammonia (NH3), Chlorine based gases (CL12), and the thermal decomposition by product of
HFC-227ea used in fire suppression systems, Hydrogen Fluoride (HF)
CORR-EX LCP-177 will not remove corrosion from an already corroded component or substrate. It should only be used as a preventative coating after removal of the corrosion.
Click here for methods and procedures for application.
Click here for technical information.